Project & building
Create the project, set location and climate, choose the building type and define the thermal zones, or start from a template.
- In the free plan
- Project templates, manual geometry
- Coming later
- Import from Revit and AutoCAD
Six phases, one continuous model. Each phase uses what the previous one produced, so nothing is re-entered by hand.
Create the project, set location and climate, choose the building type and define the thermal zones, or start from a template.
Describe the envelope, internal gains and schedules, then calculate the load profile that drives every sizing decision.
Assemble the hydronic plant (chillers, pumps, valves, heat exchangers, tanks) from real components and see flows, pressure drops and heat transfer as you place them.
Check the design under specific conditions, then across the whole year to see part-load behaviour and energy use.
Compare plant configurations side by side and derive the control strategy from the simulation results.
Generate the engineering report, diagrams and bill of quantities from the same project data.
Because every phase works on the same live model, a change in the plant design flows through to simulation and documentation without copying data between tools.